DIY Cheesecloth Ghost Tutorial for kids

Walking on the Spoookkkkyyy Side!

I’m not really one for real spooky Halloween Decorations…I guess you could say I like my frights cute, sweet, fluffy and smiling. But when my friend posted an adorable see through ghost on Facebook that she had made I new I was going to have to walk on the spooky side! Apparently this technique has been around for a while and has made it’s rounds on the crafting circuit but I had never seen it before! So I couldn’t wait to try it! A simple Google search for cheesecloth ghost will bring up a great deal of DIY tutorials. The kids and I decided to try one and this is our version for your crafting delight!

100_2501

Materials you will need

100_2479

1 Pack of cheesecloth

1 Bottle of liquid starch

Empty spray bottle. We used an old Windex bottle

Something to use for the body form…We used an empty milk jug

Something to use for the head form. We used a blown up balloon. You could use a Styrofoam ball also.

2 Wire coat hangers or something to form the arms

A Towel

Some black fabric

A hair dryer

Step One:

100_2482

I cut two slits in the side of the milk jug and placed each hanger into each slit and then bend and work the hangers until you have your desired shape for your arms.

Take your balloon or Styrofoam ball and place on top of your jug for the head. I used some scotch tape to help hold the balloon in place.

Step Two:

100_2484

Start draping cheesecloth over your form. You can play around with your length and thickness based on your desired outcome. Some people choose to use a single layer to get a more transparent ghost. I used two layers across the entire ghost form and then added an extra strip draped across each arm.

Step Three:

100_2489

100_2486

Fill your spray bottle about 3/4 of the way full of the liquid starch and top with 1/4 bottle of water. You don’t have to fill the entire bottle if your doing a smaller ghost or only one but try and keep your ratio 3 parts starch to 1 part water. This will ensure a stiffer ghost. Once that’s mixed start spraying. This is a very easy project that even my girls were able to help with…just make sure one isn’t sitting on the other side of the ghost when the other one is spraying…cheesecloth has a lot of holes in it which means little sister will be very stiff as well…lol..oops!

We soaked it pretty good and as it’s drying if it doesn’t seem stiff enough you can always spray it some more.

Step Four:

100_2491

Time to let it dry. If you do this on a sunny day I would recommend just sitting it outside to dry in the sun. We did this in the evening so I used my hair dryer and just started drying small sections at a time. This took a little bit of time but it wasn’t really that bad. Somehow I missed a picture of this step, but I think you get the idea.

Step Five:

100_2492

After your cheesecloth is dry carefully lift it off of the body form. The head may require a bit of care since the starch likes to stick to the balloon as well but don’t worry it will still keep it’s shape even if you have to pull it a bit.

Cut out 2 eyes and a nose using your black fabric and attach with either craft glue or hot glue.

As you can see when you set it on a table it will stand up and look like a spooky ghost! I didn’t make this one quite stiff enough for my liking so I decided to try and hang it instead and I have to say I LOVE it hanging from the ceiling.

Simply use some fishing line or white thread and thread it through the arms of the ghost and you can hang it from anywhere you would like. They would be awesome hanging from trees on Trick-or-Treat night!

100_2503100_2505

The girls and I tried making a mini table ghost also…he turned out pretty cute as well! Same idea I just used a plastic cup and a few plastic grocery bags to form the head.

100_2498

So there you have it…go make something spoooookkkyyyy!

Happy Haunting!

Candy

Leave a comment

Please note, comments must be approved before they are published